Induction Hardening in Sirhind
Certified induction hardening job work for Sirhind & Fatehgarh Sahib — 58–62 HRC with controlled case depth and minimal distortion. Trusted by agri-implement, food-processing and engineering units across the Mandi Gobindgarh steel belt, served from our Ludhiana plant just ~65 km away.
Looking for dependable induction hardening in Sirhind? At Thakur Industries, our precision induction hardening job work raises wear faces to 58–62 HRC while keeping the core ductile enough to survive shock loads — ideal for the agricultural-implement, food-processing and engineering units of Sirhind and Fatehgarh Sahib. Sitting in the heart of the Mandi Gobindgarh steel belt and just ~65 km from our Ludhiana plant, your unit gets metropolitan metallurgical capability with regional-partner turnaround.
// SIRHIND · FATEHGARH SAHIB //
Hardening for the Sirhind Steel Belt
Sirhind and the surrounding Fatehgarh Sahib district form one of Punjab’s busiest light-engineering corridors. The town sits directly inside the Mandi Gobindgarh steel belt — North India’s largest secondary steel and re-rolling cluster — which feeds a dense network of agricultural-implement workshops, food-processing units and general fabrication shops along the GT Road between Khanna and Sirhind.
These units roll out tillage tines, cultivator shovels, rotavator blades, harrow discs, plough shares, gear-box gears, splined shafts and seed-drill parts — components that live or die on their surface wear resistance. That is exactly where induction hardening earns its keep: a hard, fatigue-resistant skin over a tough, shock-absorbing core.
Components We Harden for Sirhind Units
- Tillage tines & cultivator shovels
- Rotavator blades & harrow discs
- Plough shares & seed-drill parts
- Gear-box gears, sprockets & pinions
- Splined & transmission shafts
- Food-plant roller shafts & screw conveyors
- Knives, cams & bearing journals
- Pins, bushes, guide rails & dies
Logistics From ~65 km Ludhiana
Our hardening plant is in Ludhiana, around 65 km from Sirhind along the Ludhiana–Khanna–Sirhind GT Road corridor — a 75–90 minute run. Rather than ask small workshops to absorb that transport, we operate consolidated pickup-and-delivery loops that sweep through Sirhind, Fatehgarh Sahib, Khanna and the Mandi Gobindgarh mills, so even single-crate batches move economically.
That logistics edge means a Fatehgarh Sahib implement maker can outsource heat treatment to us and still hit a 2–4 day turnaround, complete with certified hardness reports — without the capital and compliance burden of running an in-house furnace line.
// WHY SIRHIND UNITS CHOOSE US //
Built for the Mandi Gobindgarh Belt
Agri-Implement Expertise
Wear-tuned profiles for tines, blades, shares and discs that face abrasive Punjab soils season after season.
Engineering & Food-Plant Parts
Selective hardening for shafts, conveyors, cams, knives and dies — running faces hard, rest left machinable.
Consolidated Pickup Route
Regular collection loop through Sirhind, Fatehgarh Sahib, Khanna and Mandi Gobindgarh keeps freight low.
Certified Traceability
HRC, case-depth and dimensional reports with every batch for tractor and OEM audit trails.
Repeatable 58–62 HRC
Documented, consistent hardness batch after batch — no soft spots on critical wear faces.
Fast 2–4 Day Turnaround
Quick cycle plus a short Sirhind–Ludhiana transit keeps your production line moving.
// SPECIFICATIONS //
Sirhind Hardening Specifications
| Surface Hardness | 58–62 HRC (alloy & carbon steels); 55–60 HRC on agri wear parts |
|---|---|
| Case Depth | 0.8 mm – 3.5 mm (controlled to spec) |
| Steel Grades | EN8, EN19, EN24, 4140, 20MnCr5, EN45 / boron & spring steels |
| Typical Components | Tines, blades, shares, gears, shafts, conveyors, dies |
| Heating Temperature | 900–950 °C (induction) |
| Quench Medium | Polymer / water-based, controlled |
| Distance From Plant | ~65 km via Ludhiana–Khanna–Sirhind GT Road |
| Turnaround | 2–4 working days (standard) + transit |
| Testing | HRC verification, case-depth check, dimensional inspection |
// MATERIALS //
Steel Grades We Harden
We induction-harden all common engineering and agri steels used across the Sirhind belt. Explore our dedicated material-grade pages for hardness, case depth and application detail:
Low-Distortion Process
Induction hardening heats only the running surface, not the whole part. For Sirhind agri and engineering work this means:
- Hard, fatigue-resistant wear faces with a tough core
- Minimal warping — less straightening and re-grinding
- Selective hardening so bores and threads stay machinable
- Certified HRC & case-depth report with every batch
// PRICING & TURNAROUND //
Sirhind Rates & Lead Time
We offer competitive induction hardening rates for both prototype batches and bulk seasonal agri-implement runs. Final pricing depends on component weight, size, case depth, steel grade and quantity — share your drawing for an exact quote within 24 hours.
Pricing Basis
Per kg or per piece, with reduced rates on bulk and repeat orders from Sirhind units.
Minimum Order
No rigid minimum — single trial parts to multi-thousand-piece seasonal lots accepted.
Turnaround
Standard 2–4 working days; urgent same-week jobs for regular Fatehgarh Sahib clients.
Related Services & Nearby Towns
Gear Hardening in Ludhiana
Tooth-by-tooth hardening
Shaft Hardening in Ludhiana
Transmission shafts
Case Hardening Job Work
Carburizing & nitriding
Induction Heat Treatment Guide
Main service hub
Hardening in Mandi Gobindgarh
Steel-belt cluster
Hardening in Khanna
On the GT Road route
Hardening in Patiala
Nearby district hub
Crankshaft Hardening
Engine components
Request a Quote
Send your drawing
Sirhind Hardening FAQs
Learn more about the metallurgy of surface hardening from the ASM International heat-treatment resources.
Last updated: June 2026 · Thakur Industries, Ludhiana, Punjab
Ready to Harden Your Quality?
Contact us for a free consultation. Send your component details or drawings and get a quick quotation within 24 hours.